Extruded PTFE Rod (100% recycled)
Style: Extruded PTFE Rod
Diameter: 5mm ~ 120mm
Length: 100mm ~ 3000mm. etc.
Density: 2.1 ~ 2.3 g/cm3
Temp: -180° C ~ + 260° C
Extruded PTFE Rod (100% recycled) is manufactured by techniques of paste extruding and RAM extruding method in the diameter from 5 to 110mm with PTFE granular resin. As PTFE(Teflon) has a very low co-efficient of friction, the surface of extruded PTFE rod has similar friction levels to ice. Extruded PTFE rod can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.
Like any other materials, recycling decreased the properties of the original material a little bit. However, many of its properties are good that it is still feasible after recycling. The recycled PTFE rod is priced much lower than virgin PTFE rod.
PTFE rod (100% recycled) can be used as lining, seal components, wire insulation, slide block, gasket, seal, and dielectric material and so on. We can also manufacture 100% recycled PTFE rod in other sizes according to customers' specific requirements.
If you are interested in other recycled PTFE rod like Molded Teflon PTFE Rod (100% recycled)and other recycled PTFE sheet, please do not hesitate to contact us.
|7, 8, 9||+0.580||100||+5.0|
|10, 13, 15, 16, 18||+1.100||100, 1000||+3.60|
|20, 25, 30||+1.130||100, 1000||+3.60|
|35, 40, 45, 50||+1.600||100, 1000||+3.60|
|55, 60, 65, 70, 75, 80, 85, 90, 100||+2.000||100, 1000||+2.50|
|110, 120, 150, 200||+2.500||100, 1000||+2.50|